Sorry for all the questions, im of course a newbie and trying to a project done for Christmas.
again with the halftones, trying to get detailed exposure with low detail budget, would something like this work better than 1000w modified work light?
http://www.lowes.com/lowes/lkn?action=p ... lpage=none
Halftones 2
Moderator: Moderator Team
http://www.calibratedsps.com/screenprin ... -unit.html
You're most likely not going to get anything to do professional screenprinting work at HD or Lowes. You wanna build a deck, that's the place. You wanna be a printer, get your products from a dedicated supplier to the industry. Maybe you could get someone in your area to expose some screens for you til you can get properly set up or look on ebay? Good luck. Merry Xmas.
You're most likely not going to get anything to do professional screenprinting work at HD or Lowes. You wanna build a deck, that's the place. You wanna be a printer, get your products from a dedicated supplier to the industry. Maybe you could get someone in your area to expose some screens for you til you can get properly set up or look on ebay? Good luck. Merry Xmas.
halftones
years ago... as many of us do, I started off in the basement. I had 4 ea. 500 watt halogens purchased at a lumber / hardware store.
I ripped them apart and strapped them to an arm. I used to shoot 60 linescreen with those lights, and a piece of 3/8 thick glass holding
my film onto the screen.
I ripped them apart and strapped them to an arm. I used to shoot 60 linescreen with those lights, and a piece of 3/8 thick glass holding
my film onto the screen.