Problems with Sign Screen Printing
Moderator: Moderator Team
-
- Just Browsing
- Posts: 3
- Joined: Mon Jan 16, 2012 8:24 am
Problems with Sign Screen Printing
I just got into printing on coraplast signs and I'm having a couple issues. Are there any experts on this process? The problem I'm having is after I print the sign and pick up the screen, the inside of the design looks as though the ink was pulled back off of it, leaving spotting. There are pictures to show what I mean; it's difficult to describe.
- Attachments
-
- IMG_20120116_092829.jpg (140.04 KiB) Viewed 9262 times
Re: Problems with Sign Screen Printing
What ink are you using and are you going straight from can or using any thinners/retarders?
-
- Just Browsing
- Posts: 3
- Joined: Mon Jan 16, 2012 8:24 am
Re: Problems with Sign Screen Printing
I'm using a thinner. I spoke with someone on it and I think we have it figured out. I think it was a problem with the distance of the screen from the sign.
Re: Problems with Sign Screen Printing
offset is very important to be sure. Good luck.
-
- Just Browsing
- Posts: 3
- Joined: Mon Jan 16, 2012 8:24 am
Re: Problems with Sign Screen Printing
Thank you for your interest in helping. I'll shout if I continue having problems.