Page 1 of 1
Hello emulsion question
Posted: Mon Oct 15, 2018 8:56 pm
by Abrahanavelar
Hey how are you guys? I'm totally new to screen printing I bought my press from eBay and I am making a diy exposure unit with a 500 watt work light and my question is will this emulsion work for me or is it any good
https://www.amazon.com/gp/aw/d/B075SGYMPZ
Re: Hello emulsion question
Posted: Thu Oct 08, 2020 6:12 am
by Akdink
Hello, the emulsion you are using should be fine. im more familiar with ulano qtx or chromablue. Remember to degrease properly. As a referance halogen bulbs should be placed 12 inches from the source for around 4 minutes. its all about trial and error. Goodluck Experimenting
Re: Hello emulsion question
Posted: Wed Aug 04, 2021 12:26 pm
by Support
The emulsion you are using should be fine. I am more familiar with Ulano QTX or Chromablue. Make sure you clean well before applying the emulsion. If you want to know how long to let it dry, then remember that halogen bulbs should be placed 12 inches from the source for around 4 minutes.